Group Status; Figure 51. Lacp Group Status Page - Allied Telesis AT-GS950/24 User Manual
Gigabit ethernet smart switch web users guide
Hide thumbs
Also See for AT-GS950/24:
- Manual (30 pages) ,
- Datasheet (2 pages) ,
- Installation manual (78 pages)
Table of Contents
Advertisement
Group Status
To display the LACP Group Status, perform the following procedure:
1. Select the Bridge folder.
The Bridge folder expands.
2. From the Bridge folder, select the Trunk Config folder.
The Trunk Config folder expands.
3. From the Trunk Config folder, select LACP Group Status.
The LACP Group Status Page is displayed. See Figure 51.
Figure 51. LACP Group Status Page
Note
Go to "Create a Port Trunk" on page 151 to directly change the
parameters on this page:
AT-GS950/24 Web Interface User Guide
163
Hide quick links:
Advertisement
Table of Contents
