Subaru XT 1988 Service Manual page 99

1-5 PERIODIC MAINTENANCE SERVICES
21) Lock the ring nut by staking a point on the housing
surface facing the ring nut groove.
Fig. 81
22) Install outer oil seal by using OIL SEAL INSTALLER
(Special tool).
Tool No. Tool name
925530000 OIL SEAL INSTALLER
Be su re to renew the oil seal.
23) Install inner oil seal by using OIL SEAL INSTALLER
(Special tool).
Be su re to renew the oil seal.
24) Mount inner arm to vehicle body.
Tightening torque:
I nner bush bolt:
74 - 93 N·m (7.5 - 9.5 kg-m, 54 - 69 ft-Ib)
I nner and outer arms connecting bolts:
118 - 147 N·m
(12.0 - 15.0 kg-m, 87 - 108 ft-Ib)
25) Install rear brake assembly to inner arm, and connect
brake pipes etc.
40
Fig. 82
Tightening torque (Back plate):
46 - 58 N·m (4.7 - 5.9 kg-m, 34 - 43 ft-Ib)
26) Connect brake hose and brake pipe.
Fig.
83
27) Temporarily fit brake drum, center piece, washer spring
and castle nut to spindle in this order.
a. Play on spindle is not a fault when mounting brake drum.
b. Don't confuse orientation of washer spring.