Telnet Interface - Comtech EF Data CDM-750 Installation And Operation Manual

CDM-750 Advanced High-Speed Trunking Modem
Ethernet Management
The following are the modem-supported MIB2 SNMPv1traps / SNMPv2 notifications:
MIB2 SNMPv1 trap: Authentication Failure
MIB2 SNMPv2 notifications: Authentication Failure
The following tables show the modem-supported Alarms and Faults SNMPv1 traps / SNMPv2
notifications:
Alarms and Faults SNMPv1 traps:
cdm750UnitAlarmV1
cdm750TxTrafficAlarmV1
cdm750RxTrafficAlarmV1
cdm750TrapStoredEventAlarm
cdm750RedundancySwitch
Alarms and Faults SNMPv2 notifications:
cdm750UnitAlarm
cdm750TxTrafficAlarm
cdm750RxTrafficAlarm
cdm750TrapStoredEventAlarm
cdm750RedundancySwitch
6.4

Telnet Interface

The modem provides a Telnet interface for the purpose of Equipment M&C via the standard
equipment Remote Control protocol.
The Telnet interface requires
user login
Administrator
Read/Write
screen capture to the right
shows this login process:
at the
level and
level. The
5
1.3.6.1.6.3.1.1.5.5
6247600
6247601
6247602
6247603
6247604
1.3.6.1.4.1.6247.55.2.1.1.1
1.3.6.1.4.1.6247.55.2.1.1.2
1.3.6.1.4.1.6247.55.2.1.1.3
1.3.6.1.4.1.6247.55.2.1.1.4
1.3.6.1.4.1.6247.55.2.1.1.5
6–3
Revision 1
MN-CDM750