Telnet Interface; Table 6-1. Alarms And Faults Snmpv1 Traps; Table 6-2. Alarms And Faults Snmpv2C/Snmpv3 Notification - Comtech EF Data SLM-5650B Installation And Operation Manual

The modem supports the following Alarms and Faults SNMPv1 traps / SNMPv2 notifications:
slm5650UnitAlarmV1
slm5650TxTrafficAlarmV1
slm5650RxTrafficAlarmV1
slm5650RedundancyStateV1
slm5650UnitAlarmV2
slm5650TxTrafficAlarmV2
slm5650RxTrafficAlarmV2
slm5650RedundancyStateV2
6.5

Telnet Interface

Chapter 9. NP INTERFACE TELNET/SSH CLI OPERATION
A Telnet interface is provided for the purpose of Equipment M&C via the standard Remote
Control protocol. The Telnet interface requires login at the Administrator and Read/Write User
Access Levels.
An example of the login
process is shown in this
example to the right:
Ethernet-Based Management

Table 6-1. Alarms and Faults SNMPv1 Traps

Table 6-2. Alarms and Faults SNMPv2c/SNMPv3 Notification

6–7
SLM-5650B Satellite Modem
62471081
62471082
62471083
62471084
1.3.6.1.4.1.6247.108.1.3.2.1.15
1.3.6.1.4.1.6247.108.1.3.2.2.11
1.3.6.1.4.1.6247.108.1.3.2.3.20
1.3.6.1.4.1.6247.108.1.3.9.1
Revision 2
MN-SLM-5650B