Control Wiring
All control wiring, except the damper control output and the programmable relay outputs,
connects to the terminals on the drive. The following diagram shows control connections
that are available on
FRENIC-EcoPAK
Description of Control Connections
Damper Control output (DMPRLY):
o CTB 1-2
o Used to control the position of a damper valve in coordination with drive
operation
Programmable Relay 1 output (PRLY1):
o CTB 3-4 for NO contacts rated for 1A @ 230VAC
o Provides drive output signal Y2, which is user-selectable
Programmable Relay 2 output (PRLY2):
o CTB 5-6 for NO contacts rated for 1A @ 230VAC
o Provides drive output signal Y3, which is user-selectable
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
panels:
Page 10 of 22