Displaying Lldp Local Information - Cisco SF500-24 Administration Manual

Administration: Discovery
Configuring LLDP
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the device appears.
• System Name—Name of device.
• System Description—Description of the device (in alpha-numeric format).
• Supported System Capabilities—Primary functions of the device, such as
Bridge, WLAN AP, or Router.
• Enabled System Capabilities—Primary enabled function(s) of the device.
• Port ID Subtype—Type of the port identifier that is shown.
LLDP Port Status Table
• Interface—Port identifier.
• LLDP Status—LLDP publishing option.
• LLDP MED Status—Enabled or disabled.
• Local PoE—Local PoE information advertised.
• Remote PoE—PoE information advertised by the neighbor.
• # of neighbors—Number of neighbors discovered.
• Neighbor Capability of 1st Device—Displays the primary functions of the
neighbor; for example: Bridge or Router.

Displaying LLDP Local Information

To view the LLDP local port status advertised on a port:
Click Administration > Discovery - LLDP > LLDP Local Information.
On the bottom of the page, click LLDP Port Status Table.
Click LLDP Local Information Details to see the details of the LLDP and LLDP MED
TLVs sent to the neighbor.
Click LLDP Neighbor Information Details to see the details of the LLDP and LLDP-
MED TLVs received from the neighbor.
Select the desired port from the Port list.
9
132