Show Ip Lisp Statistics - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show ip lisp statistics

To display Locator/ID Separation Protocol (LISP) IPv4 address-family packet count statistics, use the
show ip lisp statistics command.
This command has no arguments or keywords.
Syntax Description
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ip lisp statistics command to display IPv4 LISP statistics related to packet encapsulations,
Usage Guidelines
deencapsulations, map requests, map replies, map-registers, and other LISP-related packets.
This command does not require a license.
This example shows how to display LISP IPv4 address-family packet count statistics:
Examples
switch# show ip lisp statistics
LISP Statistics for VRF "default" - last cleared: never
Data Forwarding:
IPv4-in-IPv4 encap/decap packets:
IPv4-in-IPv6 encap/decap packets:
Translated packets in/out:
Map-cache lookup succeeded/failed:
LISP-ALT lookup succeeded/failed:
Packets with SMRs in/out:
Loc-reach-bit changes local/remote:
Control Packets:
Data-Probes in/out:
Map-Requests in/out:
Map-Replies in/out:
OL-25345-01
show ip lisp statistics
Modification
This command was introduced.
Encapsulated Map-Requests in/out:
RLOC-probe Map-Requests in/out:
Authoritative in/out:
Non-authoritative in/out:
4687/33220
0/3555
0/0
5908/78
0/0
0/0
0/0
0/0
654/90
0/90
607/0
73/654
4/654
69/0
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ip lisp statistics
LSP-167