Qos Wrr-Queue Wrtd - Cisco 300 Series Cli Manual

Quality of Service (QoS) Commands
OL-32830-01 Command Line Interface Reference Guide
that is rate limited, the packet is counted only in the traffic policing of the policy
map.
This command does not work in Layer 3 mode and it does not work in conjunction
with IP Source Guard.
Example
The following example limits the rate on VLAN 11 to 150000 kbps or the normal
burst size to 9600 bytes.
switchxxxxxx(config)# rate-limit

39.24 qos wrr-queue wrtd

Use the qos wrr-queue wrtd Global Configuration mode command to enable
Weighted Random Tail Drop (WRTD). Use the no form of this command to disable
WRTD.
Syntax
qos wrr-queue wrtd
no qos wrr-queue wrtd
Parameters
N/A
Default
Disabled
Command Mode
Global Configuration mode
User Guidelines
The command is effective after reset.
Example
switchxxxxxx(config)# qos wrr-queue wrtd
11 150000 9600
39
768