Show Wrr-Queue Bandwidth - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

show wrr-queue bandwidth

Use the show wrr-queue bandwidth user EXEC command to display the weighted round-robin (WRR)
bandwidth allocation for the four class of service (CoS) priority queues.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.0(5.2)WC(1)
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show wrr-queue bandwidth command:
Switch> show wrr-queue bandwidth
WRR Queue
Bandwidth
Related Commands Command
show wrr-queue cos-map
wrr-queue bandwidth
wrr-queue cos-map
0L-10102-01
show wrr-queue bandwidth [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 1 2 3
: 10 20 30 40
4
Description
Displays the mapping of the CoS to the priority queues.
Assigns WRR weights to the four CoS priority queues.
Assigns CoS values to the CoS priority queues.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show wrr-queue bandwidth
2-427