Show Qos Interface - Cisco 300 Series Cli Manual

49
820
Syntax
show qos wrr-queue wrtd
Parameters
N/A
Default Configuration
N/A
Command Mode
Exec mode
Example
switchxxxxxx# show qos wrr-queue wrtd
Weighted Random Tail Drop is disabled
Weighted Random Tail Drop will be enabled after reset

49.26 show qos interface

Use the show qos interface EXEC mode command to display Quality of Service
(QoS) information on the interface.
Syntax
show qos interface [ buffers | queueing | policers | shapers | rate-limit] [interface-id]
Parameters
•
buffers—Displays the buffer settings for the interface's queues. For GE
ports, displays the queue depth for each of the 4 queues.
•
queueing—Displays the queue's strategy (WRR or EF), the weight for WRR
queues, the CoS to queue map and the EF priority.
•
policers—Displays all the policers configured for this interface, their
settings, and the number of policers currently unused (on a VLAN).
•
shapers—Displays the shaper of the specified interface and the shaper for
the queue on the specified interface.
•
rate-limit—Displays the rate-limit configuration.
Quality of Service (QoS) Commands
78-21075-01 Command Line Interface Reference Guide