Show Qos Interface - Cisco Sx350 Cli Manual

Quality of Service (QoS) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Command Mode
Privileged EXEC mode
Example
switchxxxxxx(config)# show qos wrr-queue wrtd
Weighted Random Tail Drop is disabled
Weighted Random Tail Drop will be enabled after reset

47.26 show qos interface

Use the show qos interface Privileged EXEC mode command to display Quality of
Service (QoS) information on the interface.
Syntax
show qos interface [buffers | queueing | policers | shapers] [
Parameters
•
buffers—Displays the buffer settings for the interface's queues. For GE
ports, displays the queue depth for each of the queues.For FE ports,
displays the minimum reserved setting.
•
queueing—Displays the queue's strategy (WRR or EF), the weight for WRR
queues, the CoS to queue map and the EF priority.
•
policers—Displays all the policers configured for this interface, their
settings, and the number of policers currently unused (on a VLAN).
•
shapers—Displays the shaper of the specified interface and the shaper for
the queue on the specified interface.
•
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, or Port-channel.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
47
interface-id
]
946