Show Mls Qos Interface - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show mls qos interface

Use the show mls qos interface user EXEC command to display quality of service (QoS) information
at the interface level.
Syntax Description interface-id
buffers
policers
queueing
statistics
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(4)EA1
78-11195-09
show mls qos interface [interface-id] [buffers | policers | queueing | statistics]
[ | {begin | exclude | include} expression]
(Optional) Display QoS information for the specified interface. Valid interfaces
include physical ports.
(Optional) Display buffer settings of the queues. For Gigabit-capable Ethernet
ports, the display includes the queue depth for each of the four queues and the tail
drop or Weighted Random Early Detection (WRED) thresholds. For 10/100
Ethernet ports, the display includes the configured minimum-reserve settings.
(Optional) Display all the policers configured on the interface, their settings, and
the number of policers that are currently unassigned.
(Optional) Display queueing strategy (weighted round robin, priority queueing),
the weights corresponding to the queues, and the class of service
(CoS)-to-egress-queue map.
(Optional) Display all the Differentiated Services Code Points (DSCPs) for which
statistics are maintained and the corresponding ingress and egress statistics,
including the number of bytes dropped.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Catalyst 3550 Multilayer Switch Command Reference
show mls qos interface
2-327