Show Dot1Q-Tunnel - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

show dot1q-tunnel

Use the show dot1q-tunnel user EXEC command to display information about 802.1Q tunnel ports.
Syntax Description
interface interface-id
Command Modes
User EXEC
Command History Release
12.1(14)AX
Examples
This is an example of output from the show dot1q-tunnel command:
Switch> show dot1q-tunnel
Port
-----
Gi1/1/1
Gi1/1/2
Po2
Related Commands Command
show vlan
switchport mode
OL-9645-10
show dot1q-tunnel [interface interface-id]
(Optional) Specify the interface for which to display 802.1Q tunneling
information. Valid interfaces include physical ports and port channels.
Modification
This command was introduced.
dot1q tag native
dot1q-tunnel
Description
Displays 802.1Q native VLAN tagging status.
Configures an interface as an 802.1Q tunnel port.
Catalyst 3750 Metro Switch Command Reference
show dot1q-tunnel
2-449