Show Ip Igmp Snooping Groups - Cisco Catalyst 3650 series Command Reference Manual

show ip igmp snooping groups

To display the Internet Group Management Protocol (IGMP) snooping multicast table for the device or the
multicast information, use the show ip igmp snooping groups privileged EXEC command.
show ip igmp snooping groups [vlan vlan-id ] [[count] | ip_address]
Syntax Description
vlan vlan-id
count
ip_address
Command Modes
Privileged EXEC
User EXEC
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not
appear, but the lines that contain Output appear.
Examples This is an example of output from the show ip igmp snooping groups command without any keywords. It
displays the multicast table for the device:
Device# show ip igmp snooping groups
Vlan
-------------------------------------------------------------
1
1
2
104
104
This is an example of output from the show ip igmp snooping groups count command. It displays the total
number of multicast groups on the device:
Device# show ip igmp snooping groups count
Total number of multicast groups: 2
(Optional) Specifies a VLAN; the range is 1 to 1001 and 1006 to 4094. Use this
option to display the multicast table for a specified multicast VLAN or specific
multicast information.
(Optional) Displays the total number of entries for the specified command options
instead of the actual entries.
(Optional) Characteristics of the multicast group with the specified group IP address.
Group Type
224.1.4.4 igmp
224.1.4.5 igmp
224.0.1.40 igmp
224.1.4.2 igmp
224.1.4.3 igmp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
Modification
This command was introduced.
Version Port List
Gi1/0/11
Gi1/0/11
v2 Gi1/0/15
v2 Gi2/0/1, Gi2/0/2
v2 Gi2/0/1, Gi2/0/2
show ip igmp snooping groups
255