Show Cfs Status - Cisco Nexus 7000 Series Reference Manual

Show Commands

show cfs status

To display the current state of Cisco Fabric Services (CFS), use the show cfs status command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the current state of CFS:
switch# show cfs status
Distribution : Enabled
Distribution over IP : Enabled - mode IPv4
IPv4 multicast address : 239.255.70.83
IPv6 multicast address : ff15::efff:4653
Distribution over Ethernet : Disabled
Total number of entries = 8
Related Commands Command
show application_name
session status
show cfs internal
show cfs lock
show cfs merge status
name
OL-25806-03
show cfs status
Modification
This command was introduced.
Description
Displays the CFS configuration session status for the application, including
the last action, the result, and the reason if there was a failure.
Displays information internal to CFS including memory statistics, event
history, and so on.
Displays all active CFS fabric locks.
Displays the merge status for a given CFS application.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show cfs status
443