Clear Qos Statistics - Cisco Nexus 7000 Series Command Reference Manual

clear qos statistics

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear qos statistics
To clear the quality of service (QoS) statistics, use the clear qos statistics command.
Syntax Description interface
ethernet
port-channel
vlan vlan-id
input
output
type
qos
queuing
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines If you do not specify the interface or VLAN, the device clears the counters for all VLANs and interfaces.
This command does not require a license.
Examples This example shows how to clear all the QoS statistics:
switch# clear qos statistics
switch#
This example shows how to clear all input QoS statistics for VLAN 1:
switch# clear qos statistics vlan 1 input
switch#
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-16
clear qos statistics [{interface [ethernet type/slot | port-channel number] | [vlan [vlan-id]} [input
| output] [type {qos | queuing}]]
(Optional) Specifies which interface to clear.
(Optional) Specifies the statistics that are assigned to the Ethernet interface.
(Optional) Specifies the statistics that are assigned to the port channel.
(Optional) Specifies a VLAN to clear. Valid values are from 1 to 4094.
(Optional) Clears only input statistics.
(Optional) Clears only output statistics.
(Optional) Specifies the type of statistics to clear.
Specifies to clear QoS statistics.
Specifies to clear queuing statistics.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01