Clear Ip Arp Inspection Statistics Vlan - Cisco Nexus 5500 Series Command Reference Manual

Chapter C Commands

clear ip arp inspection statistics vlan

To clear the Dynamic ARP Inspection (DAI) statistics for a specified VLAN, use the clear ip arp
inspection statistics vlan command.
Syntax Description vlan vlan-list
Command Default None
Command Modes Any command mode
Command History Release
5.2(1)N1(1)
Examples This example shows how to clear the DAI statistics for VLAN 2:
switch# clear ip arp inspection statistics vlan 2
switch#
This example shows how to clear the DAI statistics for VLANs 5 through 12:
switch# clear ip arp inspection statistics vlan 5-12
switch#
This example shows how to clear the DAI statistics for VLAN 2 and VLANs 5 through 12:
switch# clear ip arp inspection statistics vlan 2,5-12
switch#
Related Commands Command
clear ip arp inspection
log
ip arp inspection
log-buffer
show ip arp inspection Displays the DAI configuration status.
show ip arp inspection
vlan
OL-27883-02
clear ip arp inspection statistics vlan vlan-list
Specifies the VLANs whose DAI statistics this command clears. The
vlan-list argument allows you to specify a single VLAN ID, a range of
VLAN IDs, or comma-separated IDs and ranges. Valid VLAN IDs are from
1 to 4094, except for the VLANs reserved for the internal switch use.
Modification
This command was introduced.
Description
Clears the DAI logging buffer.
Configures the DAI logging buffer size.
Displays DAI status for a specified list of VLANs.
Cisco Nexus 5500 Series NX-OS Security Command Reference
clear ip arp inspection statistics vlan
29