Authentication Dot1X; Clear Dot1X Statistics - Cisco Small Business 200 Series User Manual

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

authentication dot1x

This command assigns the authentication method to use for 802. 1 X port security.
Use the no form of the command to disable 802. 1 X port security.
authentication dot1x method1
no authentication dot1x
Syntax Descriptions
Parameter
method1
method2
Command Modes
Global Config
Usage Guidelines
No authentication is enabled by default.

clear dot1x statistics

This command resets the 802. 1 x statistics for the specified port or for all ports.
clear dot1x statistics {interface | all}
[ ]
method2
Description
The first method to use to authenticate. Possible value are:
• radius—Uses the list of all authentication servers for
authentication
• local—Uses locally configured users as the
authentication list.
• none—No authentication is used.
The backup method to use if authentication using
method1 fails. The same choices are available for
method2 as for method1; however, method 1 cannot be
repeated.
8
343