Rmon Collection Stats - Cisco Catalyst 3550 Command Reference Manual

rmon collection stats

rmon collection stats
Use the rmon collection stats interface configuration command to collect Ethernet group statistics,
which include utilization statistics about broadcast and multicast packets, and error statistics about
Cyclic Redundancy Check (CRC) alignment errors and collisions. Use the no form of this command to
return to the default setting.
Syntax Description
index
owner name
Defaults
The RMON statistics collection is disabled.
Command Modes
Interface configuration
Command History Release
12.1(4)EA1
Usage Guidelines
The RMON statistics collection command is based on hardware counters.
Examples
This example shows how to collect RMON statistics for the owner root on Gigabit Ethernet interface 0/1:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# rmon collection stats 2 owner root
You can verify your setting by entering the show rmon statistics privileged EXEC command.
Related Commands Command
show rmon statistics
Catalyst 3550 Multilayer Switch Command Reference
2-210
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Remote Network Monitoring (RMON) collection control index. The range is
1 to 65535.
(Optional) Owner of the RMON collection.
Modification
This command was first introduced.
Description
Displays RMON statistics.
For syntax information, select Cisco IOS Configuration
Fundamentals Command Reference for Release 12.1 > Cisco IOS
System Management Commands > RMON Commands.
Chapter 2 Cisco IOS Commands
78-11195-09