Rmon Collection Stats - Cisco 300 Series Cli Manual

21
304
Field Description
Jabbers Total number of packets received, longer than
1518 octets (excluding framing bits, but
including FCS octets), and either a bad Frame
Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
64 Octets Total number of packets (including bad packets)
received that are 64 octets in length (excluding
framing bits but including FCS octets).
65 to 127 Octets Total number of packets (including bad packets)
received that are between 65 and 127 octets in
length inclusive (excluding framing bits but
including FCS octets).
128 to 255 Total number of packets (including bad packets)
Octets received that are between 128 and 255 octets
in length inclusive (excluding framing bits but
including FCS octets).
256 to 511 Total number of packets (including bad packets)
Octets received that are between 256 and 511 octets
in length inclusive (excluding framing bits but
including FCS octets).
512 to 1023 Total number of packets (including bad packets)
Octets received that were between 512 and 1023
octets in length inclusive (excluding framing bits
but including FCS octets).
1024 to max Total number of packets (including bad packets)
received that were between 1024 octets and
the maximum frame size in length inclusive
(excluding framing bits but including FCS
octets).
21.2

rmon collection stats

Use the rmon collection stats Interface Configuration mode command to enable
RMON MIB collecting history statistics (in groups) on an interface. Use the no form
of this command to remove a specified RMON history group of statistics.
Syntax
rmon collection stats index
seconds]
no rmon collection stats
Remote Network Monitoring (RMON) Commands
[owner ownername] [buckets bucket-number] [interval
index
78-21075-01 Command Line Interface Reference Guide