Rmon Collection Stats - Cisco Catalyst 2950 Command Reference Manual

rmon collection stats

rmon collection stats
Use the rmon collection stats interface configuration command to collect Ethernet group statistics. The
Ethernet group statistics include utilization statistics about broadcast and multicast packets and error
statistics about Cyclic Redundancy Check (CRC) alignment errors and collisions. Use the no form of
this command to return to the default setting.
Syntax Description index
owner name
Defaults
The RMON statistics collection is disabled.
Command Modes Interface configuration
Command History Release
12.0(5.2)WC(1)
Usage Guidelines
The RMON statistics collection command is based on hardware counters.
Examples This example shows how to collect RMON statistics for the owner root on an interface:
Switch(config)# interface fastethernet0/1
Switch(config-if)# rmon collection stats 2 owner root
You can verify your settings by entering the show rmon statistics privileged EXEC command.
Related Commands Command
show rmon statistics
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-260
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Remote Network Monitoring (RMON) collection control index. The range is
1 to 65535.
(Optional) Owner of the RMON collection.
Modification
This command was introduced.
Chapter 2
Description
Displays RMON statistics.
For more information on this command, select Cisco IOS
Configuration Fundamentals Command Reference for
Release 12.1 > Cisco IOS System Management Commands >
RMON Commands.
Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01