Console Settings (Autobaud Rate Support) - Cisco 500 series Administration Manual

General Administrative Information

Console Settings (Autobaud Rate Support)

STEP 1
STEP 2
STEP 3
Console Settings (Autobaud Rate Support)
Cisco 500 Series Stackable Managed Switch Administration Guide
Configuring the System Settings
To enter system settings:
Click Administration > System Settings. The System Settings page opens.
View or modify the system settings.
• System Description—Displays a description of the switch.
• System Location—Enter the location where the switch is physically located.
• System Contact—Enter the name of a contact person.
• Host Name—Select the host name of this switch. This is used in the prompt
of CLI commands:
- Use Default—The default hostname (System Name) of these switches is:
switch123456, where 123456 represents the last three bytes of the
switch MAC address in hex format.
- User Defined—Enter the hostname. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
• Custom Login Screen Settings—To display text on the
the text in the Login Banner text box. Click Preview to view the results.
When you define a login banner from the web-based configuration
NOTE
utility, it also activates the banner for the CLI interfaces (Console, Telnet, and
SSH).
Click Apply to set the values in the Running Configuration file.
The console port speed can be set to one of the following speeds: 4800, 9600,
19200, 38400, 57600, and 115200 or to Auto Detection.
Auto Detection enables the device to detect your console speed automatically, so
that you are not required to set it explicitly.
6
Login
page, enter
84