Screen Cleaning Method - Mitsubishi Electric GOT2000 Series Hardware User Manual
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Basic training textbook (255 pages)
Table of Contents
Advertisement
11.3
Screen Cleaning Method
Use the GOT always in a clean condition.
Cleaning and disinfecting the GOT
• For your safety, be sure to turn off the GOT before cleaning and disinfecting the surface.
• Carefully wipe the GOT screen with a soft cloth moistened with neutral detergent or ethanol.
Do not apply too much disinfectant to the cloth.
If you use alcohol for disinfection, the main component of the alcohol must be ethanol or isopropyl alcohol.
• Do not spray disinfectant directly to the GOT because doing so may cause electrical failure of the GOT and peripheral
devices.
• After wiping the surface, dry the GOT completely before turning it on.
Precautions
Do not use the following solvents.
Solvents may deform the protective sheet, dissolve the surface, or peel the paint on the surface.
• Chlorine-based cleaners (bleach or other solvents)
• Peroxides (including hydrogen peroxide)
• Acetone, ammonia, paint thinner, benzene, methylene chloride, toluene, or other solvents
11 MAINTENANCE AND INSPECTION
362
11.3 Screen Cleaning Method
Clean
Advertisement
Table of Contents
Troubleshooting
