Selection And Installation Of External Cable; Handy Got (Excluding Rh Model) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
5.4

Selection and Installation of External Cable

A cable combined for the PLC varies among the F940/F930 Handy GOT RH model and other models.
Select a suitable cable in reference to the figures below.
5.4.1

Handy GOT (Excluding RH model)

1) F940 Handy GOT
Connect the cable to
the port inside the
rear cover.
In connection through RS-422, the connection distance between the Handy GOT and the PLC should
be 11.5 m (37' 9") maximum.
a)
a)
a)
For power supply and
operation switches
b)
For the details, refer to 5.4.2.
For the details, refer to 5.4.3.
Installation and Wiring of Handy GOT 5
For the details, refer to 5.4.2.
c)
To FX
FX
Series PLC
To power supply and
operation switches
d)
To FX/FX
Series PLC
To power supply and
operation switches
For the details, refer to 5.4.2.
For the details, refer to 5.4.4.
e)
f)
To FX
FX
Series PLC
To FX/FX
Series PLC
g)
To computer link unit,
microcomputer board or
another company's PLC
To power supply and
operation switches
/FX /FX /FX /
0 0S 1S 0N
/FX /FX
1N 2N 2NC
/A/QnA
2C
/FX /FX /FX /
0 0S 1S 0N
/FX /FX
1N 2N 2NC
/A/QnA
2C
5-14