Displaying Got Screen On External Monitor - Mitsubishi Electric GOT1000 Series Connection Manual

POINT POINT POINT
(1) Power supply of video camera
Depending on the video camera type, noises from the power supply cable of the camera may cause a
malfunction on the PLC or the GOT.In this case, apply the following line filter to the power line of the camera.
Recommended line filter: TDK ZHC2203-11 (or equivalent)
(2) Power supply of vision sensor
If a video camera is used via a vision sensor, a power supply module may be required depending on the vision
sensor to be used.
(3) Selection of Video signal output source
Depending on the video camera or the system to be used, both the power supply module and the video
camera can output video signals. If video signals are output from both the video camera and the power supply
module, the voltage level of the signals become lower and the video image cannot be correctly displayed. In
this case, use the output from the video camera.
(4) Power-On of video camera
Turn on the video camera simultaneously with the GOT.

12.2.2 Displaying GOT screen on external monitor

External monitor
Signal
type
Model name
For connectable external monitor types, refer to the
following Technical News.
Analog
RGB
List of valid devices applicable for GOT1000
series (GOT-A-0010)
*1 The cable length differs depending on the specification of the external monitor used by the user.
External monitor
Connection cable
Connection cable
Model name
GT15-C50VG(5m)
Analog RGB connection
diagram 2)
GOT
Distance
Option device
GT16M-ROUT
or
*1
GT15V-75ROUT
12. VIDEO/RGB CONNECTION
12.2 System Configuration
GOT Number of
connectable
Model
equipment
1 for 1 GOT
12 - 3
9
10
11
12
13
14
15