Backup Role - Dell PowerConnect J-EX4200-24T Software Manual

Backup Role

Linecard Role
Runs the chassis management processes and control protocols.
Represents all the member switches interconnected within the Virtual Chassis
configuration. (The hostname and other properties that you assign to this switch during
setup apply to all members of the Virtual Chassis configuration.)
When a J-EX4200 switch is powered on as a standalone switch, it is considered the
master member. In a multimember Virtual Chassis configuration, one member functions
as the master and a second member functions as the backup:
In a preprovisioned configuration, one of the two members assigned as
functions as the master member. The selection of which member assigned as
functions as master and which as backup is determined by the software
routing-engine
based on the master election algorithm. See "Understanding How the Master in a
Virtual Chassis Configuration Is Elected" on page 698.
In a configuration that is not preprovisioned, the selection of the master and backup
is determined by the mastership priority value and secondary factors in the master
election algorithm.
The member that functions in the backup role:
Maintains a state of readiness to take over the master role if the master fails.
Runs the Junos OS for J-EX Series switches in a backup role.
Synchronizes with the master in terms of protocol states, forwarding tables, and so
forth, so that it is prepared to preserve routing information and maintain network
connectivity without disruption in case the master is unavailable.
You must have at least two member switches in a Virtual Chassis configuration in order
to have a backup member.
In a preprovisioned configuration, one of the two members assigned as
functions in the backup role. The selection of which member assigned as
functions as master and which as backup is determined by the software based on the
master election algorithm. See "Understanding How the Master in a Virtual Chassis
Configuration Is Elected" on page 698.
In a configuration that is not preprovisioned, the selection of the master and backup
is determined by the mastership priority value and secondary factors in the master
election algorithm.
A member that functions in the linecard role:
Runs only a subset of the Junos OS for J-EX Series switches.
Does not run the chassis control protocols.
Can detect certain error conditions (such as an unplugged cable) on any interfaces
that have been configured on it through the master.
Chapter 43: Virtual Chassis—Overview, Components, and Configurations
routing-engine
routing-engine
routing-engine
695