Toshiba e-STUDIO206L Service Manual page 1367

Sub
05/08 Mode Element
element
08 Setting System User Card reader
Mode interface
08 Setting System User Card reader
Mode interface
08 Setting System User Card reader
Mode interface
08 Setting System User Card reader
mode interface
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
3501
3502
3503
3504
3612
3615
3619
Sub- Default Acceptable
Details
code value value
Format information 1 0
429496729
Format information 2 0
429496729
Format information 3 0
0xFFFFFF
FFFFFFFF
Card authentication 0 0~100
LDAP server
Date of unpacking - 13 digits
List print USB storage 0 0~1
setting
Clearing of service -
history list file
24
RAM Contents
0- SYS To access the data in the noncontact IC card, the Key
Information "LLLL" and the Sector Number "MMMM"
5 should be set. The "LLLL" should be set first, and then
"MMMM".
<KP-2005>
LLLL: Key information
MMMM: Sector number (hexadecimal number)
0- SYS The data of the block number in the noncontact IC is
set.
5 <KP-2005>
RRBSEbse (hexadecimal number)
RR: 00 (Fixed)
B: 1st area block number
S: 1st area beginning byte offset
E: 1st area ending byte offset
b: 2nd area block number
s: 2nd area beginning byte offset
e: 2nd area ending byte offset
* If the 2nd block/area is not used, set the SSTU to
"FFFF" (hexadecimal number), the bse to"FFF"
(hexadecimal number).
0- SYS Security key "KKKKKKKKKKKK" (12 digits)
<hexadecimal number> in the [Key Information] of the
[Sector Number] set in the code 08-3501 should be
FF entered.
SYS LDAP server number for the card authentication when
a non-contact IC card is used should be set.
SYS Year/month/date/day/hour/minute/second
Example: 03 07 0 13 13 27 48
"Day" - "0" is for "Sunday". Proceeds Monday through
Saturday from "1" to "6".
SYS 0: Enable (USB storage available)
1: Disable (USB storage not available)
- SYS Initializes the service history list file.
Proc Service
edure UI
5 Yes
5 Yes
5 Yes
1
11 Yes
1
3