Toshiba e-STUDIO206L Service Manual page 1364

Sub
05/08 Mode Element
element
08 Setting Process Separation
mode
08 Setting Process Separation
mode
08 Setting Process Separation
mode
08 Setting Process Developer
mode
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
2966
2966
2966
2978
Sub- Default Acceptable
Details
code value value
0 Thin paper separation 141 0~255
leading edge output
correction (H)
1 Thin paper separation Refer to 0~255
center output contents
correction (C)
2 Thin paper separation Refer to 0~255
trailing edge output contents
correction (L)
Switching of 4
correction of
development contrast
life
21
RAM Contents
M
M <Default value>
e-STUDIO207L/257/307: 151
e-STUDIO357/457/507: 148
M <Default value>
e-STUDIO207L/257/307: 151
e-STUDIO357/457/507: 148
0-8 M Adjusts the density of the image. The smaller the
corrected amount is, the darker the image becomes.
0 to 5: Starts correction when the developer counter
counts 5k sheets.
6 to 8: Starts correction when the developer counter
counts 10k sheets.
If the developer counter does not reach the values
above, the density does not change even if the setting
value is altered.
Corrected amount for 08-2978
0: -65
1: ±0
2: -22
3: -43
4: -85
5: -105
6: -65 (correction starts from 10k sheets)
7: -43 (correction starts from 10k sheets)
8: -85 (correction starts from 10k sheets)
(Unit: V)
* Be sure to check the image after the change.
* The changed setting value is taken over after the
replacement of the process unit or the developer
material.
Proc Service
edure UI
4
4
4
1