Toshiba e-STUDIO206L Service Manual page 1379

Sub
05/08 Mode Element
element
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
08 Setting Printer Feeding Automatic change of
mode system/Pa paper source
per
transport
08 Setting Printer Feeding Automatic change of
mode system/Pa paper source
per
transport
08 Setting Printer Feeding Feeding retry number
mode system/Pa setting
per
transport
08 Setting Printer Feeding Feeding retry number
mode system/Pa setting
per
transport
08 Setting Printer Feeding Feeding retry number
mode system/Pa setting
per
transport
08 Setting Printer Feeding Feeding retry number
mode system/Pa setting
per
transport
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
4014
4015
When a drawer is 4016
specified
When a drawer is 4016
specified
Upper drawer 4020
Upper drawer 4020
Lower drawer 4021
Lower drawer 4021
Sub- Default Acceptable
Details
code value value
Rotational status of 1 0~1
polygonal motor on
standby
Timing of auto- 3 0~6
clearing of polygonal
motor pre-running
rotation
0 PPC 0 0~1
1 Printing/BOX printing 0 0~1
0 Plain paper 5 0~5
1 Others 5 0~5
0 Plain paper 5 0~5
1 Others 5 0~5
36
RAM Contents
SYS Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotational speed is set at 08-4005.)
1: Stopped
SYS Switches the polygonal motor to the standby rotation
when a certain period of time has passed from the pre-
running. At this code, the period to switch the status to
the standby rotation is set.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec. 5:
40 sec. 6: 45 sec.
* This setting is effective when "0" or "2" is set at 08-
4012.
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when printing/BOX printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
M Sets the number of times of the feeding retry from the
upper drawer.
M Sets the number of times of the feeding retry from the
upper drawer.
M Sets the number of times of the feeding retry from the
lower drawer.
M Sets the number of times of the feeding retry from the
lower drawer.
Proc Service
edure UI
1
1
4 Yes
4 Yes
4 Yes
4 Yes
4 Yes
4 Yes