Network - Huawei Quidway S8500 Series Command Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-0] netbios-type b-node

4.2.25 network

Syntax
network ip-address [ mask netmask ]
undo network
View
DHCP address pool view
Parameter
ip-address: Address range for dynamic IP address assigning.
mask netmask: Specifies the subnet mask of the address pool. If you do not provide
this argument, the default subnet mask is used.
Description
Use the network command to configure an address range for dynamic IP address
assignment.
Use the undo network command to remove the address range configured for dynamic
IP address assignment.
By default, no IP address range is configured for dynamic IP address assignment.
Each DHCP address pool can be configured with only one address range. If you
execute the network command multiple times, then only the last configured address
range works.
Related command: dhcp server ip-pool, dhcp server forbidden-ip.
Example
# Configure 192.168.8.0/24 as the address range for the global DHCP address pool 0.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-0] network 192.168.8.0 mask 255.255.255.0
Huawei Technologies Proprietary
4-27
Chapter 4 DHCP Configuration Commands