Network Cable - Huawei S2720 Series Hardware Description

S2720&S2750 Series Ethernet Switches
Hardware Description
Table 3-3 Common optical connectors
Connector
Type
Square
connector
Round
connector
When connecting or removing a square connector, align the connector with the optical interface
and do not rotate the fiber. Pay attention to the following points:
l To connect a fiber, align the head of the fiber jumper with the optical interface and insert the
l To remove a fiber, press the latch on the connector and pull the fiber out.
Fiber Adapter
A fiber adapter (also called a flange) is a fiber connection component. Fiber adapters are widely
used in optical distribution frames (ODF), fiber transmission equipment, or optical instruments.

3.3 Network Cable

Types of Network Cables
A network cable connects a maintenance terminal to the console port on the main control board
for local or remote maintenance.
Network cables are classified into straight-through cables and crossover cables.
l
l
Issue 08 (2015-02-12)
Optical Connector
SC/PC
connector
FC/PC
connector
NOTICE
optical fiber into the interface gently.
Straight-through cable: The twisted pairs in the RJ45 connectors at both ends are crimped
in the same sequence. A straight-through cable connects two devices of different types, for
example, a PC and a switch.
Crossover cable: The twisted pairs in the RJ45 connectors at two ends are crimped in
different sequences. A crossover cable connects two devices or interfaces of the same type,
for example, two PCs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LC/PC MTRJ/PC
connector connector
ST/PC -
connector
3 Cables
MPO connector
-
38