Show Vlt Counters - Dell S6100 Configuration Manual

show vlt counters

Displays counter information.
Syntax show vlt counters [arp| igmp-snoop | interface | mac | ndp]
Parameters
arp
igmp-snoop
interface
mac
ndp
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
Usage Information If you do not add a parameter such as arp or mac, the output displays all the counters.
Example
Dell# show vlt counter
Total VLT counters
-------------------------
L2 Total MAC-Address Count :
IGMP MRouter Vlans count :
IGMP Mcast Groups count :
ARP entries count :
Example (igmp-
Dell# show vlt counter igmp-snoop
snoop) Total IGMP VLT counters
----------------------
IGMP MRouter Vlans count : 1
IGMP Mcast Groups count
1680 Virtual Link Trunking (VLT)
Enter the keyword arp to display the ARP counter information for the VLT.
Enter the keywords igmp-snoop to display the igmp-snooping counter information for
the VLT.
Enter the keyword interface to display the interface counter information for the VLT.
Enter the keyword mac to display the MAC address counter information for the VLT.
Enter the keyword ndp to display the VLT counter information for NDP.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
: 5