Table of Contents
Advertisement
Table 279 General MVR Configuration Commands (continued)
COMMAND
name <name-str>
receiver-port <aid>
source-port <aid>
tagged <aid>
no mvr <vlan-id>
no group <name-str>
no inactive
no receiver-port <ge|msc>-<slot>-<port> Disables the receiver port(s). An MVR receiver
no source-port <ge|msc>-<slot>-<port>
no tagged <ge|msc>-<slot>-<port>
76.9 MVR Group Configuration
All source ports and receiver ports belonging to a multicast group can receive multicast data sent to this
multicast group.
Configure MVR IP multicast group address(es) by the group command under mvr <vlan-id>.
Note: A port can belong to more than one multicast VLAN. However, IP multicast group
addresses in different multicast VLANs cannot overlap.
OLT2406# show mvr 10
MVLAN: 10
Name:
Source Port: msc-1-1, msc-1-2, msc-1-3, msc-1-4
Receiver Port:
Tagged Port: msc-1-1, msc-1-2, msc-1-3, msc-1-4
MVR Group Configuration:
Name
--------------------------------
A0
Chapter 76 Multicast
Active: Yes
Mode: Dynamic
OLT2406 User's Guide
546
DESCRIPTION
Sets the MVR name for identification purposes.
name-str: 1-32 English keyboard characters
Sets the receiver port(s). An MVR receiver port
can only receive multicast traffic in a multicast
VLAN.
aid: <ge|msc>-<slot>-<port>
Sets the source port(s). An MVR source port can
send and receive multicast traffic in a multicast
VLAN.
Sets the port(s) to tag VLAN tags.
Removes an MVR configuration of the specified
VLAN from the OLT.
Removes the specified MVR multicast group.
Enables the MVR settings.
port can only receive multicast traffic in a
multicast VLAN.
Disables the source port(s). An MVR source port
can send and receive multicast traffic in a
multicast VLAN.
Sets the port(s) to untag VLAN tags.
802.1p Priority: 0
Start Address
End Address
---------------
---------------
224.1.1.1
224.1.1.255
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
Advertisement
Table of Contents
Troubleshooting
