Table of Contents
Advertisement
Table 294 VoIP Common Profile Commands (continued)
COMMAND
jitter-buf-max <0~500>
jitter-target <0~500>
local-port <1~65535>
oob-dtmf <enable|disable>
piggyback
pstn-protocol <0~999>
signalling-code <loo-str|gro-
str|loo-rev|coi-fir|dia-
ton|mul-par>
tone <enable|disable>
78.3 VoIP SIP Profile Commands
The following table lists the commands for configuring VoIP SIP profiles.
Table 295 VoIP SIP Profile Commands
COMMAND
voip-sip-profile <name>
bridged-line-agent-uri <1~63
characters>
call-present <features>
Chapter 78 VoIP
DESCRIPTION
Sets the maximum depth (from 0 to 500) of the
jitter buffer in milliseconds.
Sets the target value (from 0 to 5000) of the jitter
buffer in milliseconds.
Sets the RTP port to use for voice traffic.
Turns out-of-band DTMF carriage on or off.
Turn RTP piggyback events on or off.
Sets which variant (from 0 to 999) of POTS
signalling to use on the associated UNIs.
Sets the signaling code:
loo-str: Loop start
gro-str: Ground start
loo-rev: Loop reverse battery
coi-fir: Coin first
dia-ton: Dial tone first
mul-par: Multi-party
Turns the handling of tones through RTP tone
events according to RFC 4733 on or off.
DESCRIPTION
Creates the specified profile of VoIP SIP settings
(1 to 15 character name) and enters the sub-
command mode for configuring it.
Sets the bridged line agent URI (from 1 to 63
characters). An interaction SIP bridge enables
agents to use an IP telephone at a remote
location through a TCP/IP network to a
Customer Interaction Center.
Configures the list of supported call presentation
features. You can specify multiple options
separated by commas without spaces; for
example: cal-for,dia-ton.
spl-rin: Message waiting indication splash ring
dia-ton: Message waiting indication special
dial tone
vis-ind: Message waiting indication visual
indication
cal-for: Call forwarding indication
OLT2406 User's Guide
565
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
M
P
C
13
C
13
C
13
Advertisement
Table of Contents
Troubleshooting
