Uniport Voip - ZyXEL Communications OLT2406 User Manual

Table 135 Advanced Application > ONT Template > Uniport Multicast
LABEL
Active
UNIVID
Rule
Delete
*
Delete
Cancel

38.2.5 Uniport VoIP

Use this screen to configure UNI port VoIP settings. Click Uniport VoIP in the Advanced Application > ONT
Template screen to display the screen as shown.
Figure 189 Advanced Application > ONT Template > Uniport VoIP
The following table describes the labels in this screen.
Table 136 Advanced Application > ONT Template > Uniport VoIP
LABEL
Active
Uniport AID
Vlan
Common
Profile
Chapter 38 ONT Template
DESCRIPTION
This displays whether the UNI port multicast channel setting is active (Y) or not (N).
This displays the VLAN ID of the multicast channel.
This displays the multicast channel settings.
Select this for one or more entries and click Delete to remove them.
Select this to select all of the entries for deletion.
Click Delete to remove the entries with the Delete option selected.
Click Cancel to begin configuring the screen again.
DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the first
drop-down list.
Choose the template that you want the settings configured here to apply to from the second
drop-down list.
Select this to activate the VoIP rule on the UNI port.
Select a UNI port on the ONT. The UNI ports are represented by the format: uniport-<pon>-<ont>-
<card>-<port>.
Select the VLAN ID for the UNI port to use for VoIP traffic.
Select the VoIP common profile to have this VoIP rule apply. Click Voip-Common-Profile to view
the profile details.
OLT2406 User's Guide
312