Classifier Commands - ZyXEL Communications OLT2406 User Manual

2u temperature-hardened, 6-slot mini chassis gpon olt
Table of Contents

Advertisement

71.3 Classifier Commands

Use these commands to classify packets into traffic flows. After classifying traffic, policy commands
(Chapter 73 on page
network.
Table 258 Classifier Commands
COMMAND
show classifier [<
classifier <name> <[packet- format
<802.3untag|802.3tag|
EtherIIuntag|EtherIItag>]
[priority <0-7>] [vlan <vlan-id>]
[ethernet-type <ether-
num|ip|ipx|arp|rarp|appletalk|decn
et|ipv6>] [source-mac <src-mac-
addr>] [source-port <port-num>]
[destination-mac <dest-mac-addr>]
[dscp <0-63>] [ipv6-dscp <0-63>]
[ip-protocol <protocol-
num|tcp|udp|icmp|egp|
ospf|rsvp|igmp|igp|pim|ipsec>
[establish-only]] [ipv6-next-
header <protocol-
num|tcp|udp|icmpv6> [establish-
only]] [source-ip <src-ip-addr>
[mask-bits <mask-bits>]] [ipv6-
source-ip <src-ipv6-addr> [prefix-
length <prefix-length>]] [source-
socket <socket-num>] [destination-
ip <dest-ip-addr> [mask-bits
<mask-bits>]] [ipv6-destination-ip
<dest-ipv6-addr> [prefix-length
<prefix-length>]] [destination-
socket <socket-num>] [inactive]>
no classifier <name>
no classifier <name> inactive
The following table shows some other common Ethernet types and the corresponding protocol number.
Table 259 Common Ethernet Types and Protocol Number
ETHERNET TYPE
IP ETHII
X.75 Internet
NBS Internet
ECMA Internet
Chaosnet
X.25 Level 3
Chapter 71 Classifier
517) can be used to ensure that a traffic flow gets the requested treatment in the
DESCRIPTION
Displays classifier configuration details.
name
>]
Configures a classifier. Specify the parameters to
identify the traffic flow:
ethernet-type - enter one of the Ethernet
types or type the hexadecimal number that
identifies an Ethernet type (see
page
ip-protocol: enter one of the protocols or type
the port number that identifies the protocol (see
Table 260 on page
establish-only: enter this to identify only TCP
packets used to establish TCP connections.
source-socket: (for UDP or TCP protocols only)
specify the protocol port number.
destination-socket: (for UDP or TCP protocols
only) specify the protocol port number.
inactive: disables this classifier.
ipv6-next-header: enter an 8-bit next header
in the IPv6 packet. The Next Header field is
similar to the IPv4 Protocol field. The IPv6
protocol number ranges from 1 to 255 (see
261 on page
See
information about IPv6.
Deletes the classifier.
If you delete a classifier you cannot use policy
rule related information.
Enables a classifier.
PROTOCOL NUMBER
0800
0801
0802
0803
0804
0805
OLT2406 User's Guide
510
510)
511)
511).
Chapter 55 on page 424
for more
M
P
E
3
C
13
Table 259 on
Table
C
13
C
13

Advertisement

Table of Contents
loading

Table of Contents