ZyXEL Communications OLT2406 User Manual page 277

Table 114 Advanced Application > ONT VoIP > Voip-Sip-Profile (continued)
LABEL DESCRIPTION
re- Enter the number of seconds (0-720) the OLT tries again to register the SIP account before the
registration session ends.
head start
time
host part uri Configure the host or domain part of the SIP URI (from 1 to 63 characters).
sip registrar Configure the IP address or URI (from 1 to 63 characters) of the SIP registrar server.
softswitch Configure the SIP gateway softswitch vendor name code (4 characters).
caller id Configure the list of supported caller ID (CID) features.
cal-num: Calling number
cal-nam: Calling name
cid-blo: CID blocking (both number and name)
cid-num: CID number
cid-nam: CID name
ACR: Anonymous CID blocking
call waiting Configure the list of supported call waiting features.
cal-wai: Call waiting
cid-ann: Caller ID announcement
call progress Configure the list of supported features for calls in progress.
or transfer
3way: 3-way calling
cal-tra: Call transfer
cal-hol: Call hold
cal-par: Call park
not-dis: Do not disturb
flash: Flash on emergency service call
origin: Emergency service origination hold
6way: 6-way calling
call Configure the list of supported call presentation features.
presentation
spl-rin: Message waiting indication splash ring
dia-ton: Message waiting indication special dial tone
vis-ind: Message waiting indication visual indication
cal-for: Call forwarding indication
direction Configure the list of direct connect features.
connect
enable: Direct connect feature enabled
dia-opt: Dial tone feature delay option
direction Configure a direct connect URI (from 1 to 63 characters). Set a direct connect URI to use SIP to
connect uri direct connect a VoIP Server.
bridged line Set the bridged line agent URI (from 1 to 63 characters). An interaction SIP bridge enables agents to
agent uri use an IP telephone at a remote location through a TCP/IP network to a Customer Interaction
Center.
Chapter 31 ONT VoIP
OLT2406 User's Guide
277