Table of Contents
Advertisement
Figure 215 Management > Maintenance > Firmware Upgrade
Firmware upgrades are applied after a reboot.After the firmware upgrade process is complete, see the
System Info screen to verify your current firmware version number.
Table 164 Management > Maintenance > Firmware Upgrade
LABEL
File Path
Rebooting
UpgradeImage1/2
43.7 Restore Configuration
Use this screen to restore a previously saved configuration from your computer to the OLT.
Figure 216 Management > Maintenance > Restore Configuration
Click Choose File to locate file name of the configuration file you wish to restore. After you have
specified the file, click Restore. "config" is the name of the configuration file on the OLT, so your backup
configuration file is automatically renamed when you restore using this screen.
43.8 Backup Configuration
Use this screen to save and store your current device settings.
Backing up your OLT configurations allows you to create various "snap shots" of your device from which
you may restore at a later date.
Chapter 43 Maintenance
DESCRIPTION
Click Choose File to locate the file name of the firmware image that you wish to upload to
the OLT.
Select the Rebooting check box to reboot the OLT after the firmware upgrade process is
complete.
Select a firmware image (BootImage1 or BootImage2) that you want to load when you
reboot the OLT. You can check which firmware image is currently operating on the OLT in
the Config field of the Management > Maintenance screen..
Click this to upgrade the firmware of the firmware image 1/2.
OLT2406 User's Guide
350
Advertisement
Table of Contents
Troubleshooting
