39.1 Overview
Use the ONT Quick Setup screens to create, modify, and delete an ONT configuration.
39.1.1 What You Can Do
• Use the ONT Quick Setup screen
• Use the ONT Status screen
• Use the ONT Alarm screen
• Use the ONT Bandwidth Group screen
group settings.
• Use the Unregistered ONT screen
connected to the GPON interface.
• Use the ONT WAN screen
39.2 The ONT Quick Setup Screen
Use this screen to register an ONT to the OLT. Click Advanced Application > ONT Quick Setup in the
navigation panel to display the screen as shown.
Note: For each GPON interface, there are up to 120 ONT IDs available for ONT registration
(The ONT IDs 121~128 are reserved for the ONT templates.)
Figure 193 Advanced Application > ONT Quick Setup
The following table describes the labels in this screen.
Table 142 Advanced Application > ONT Quick Setup
LABEL
ONT AID
Chapter 39 ONT Quick Setup
ONT Quick Setup
(Section 39.2 on page
(Section 39.3 on page
(Section 39.4 on page
(Section 39.5 on page
(Section 39.6 on page
(Section 39.7 on page
DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the
drop-down list.
This is the identifier for the ONT connected to the selected GPON interface.
OLT2406 User's Guide
C
H A P T E R
319) to register an ONT to the OLT.
320) to display the ONT status.
321) to display the ONT alarms.
323) to display the ONT's bandwidth
323) to display the unregistered ONTs
324) to display the WAN information of the ONTs.
319
39