ZyXEL Communications OLT2406 User Manual page 189

Click Advanced Application > Queuing Method in the navigation panel.
Figure 116 Advanced Application > Queuing Method
The following table describes the labels in this screen.
Advanced Application > Queuing Method
LABEL DESCRIPTION
Port This label shows the port you are configuring. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Method Select SPQ (Strictly Priority Queuing) or WFQ (Weighted Fair Queuing).
Strictly Priority Queuing services queues based on priority only. When the highest priority queue
empties, traffic on the next highest-priority queue begins. Q7 has the highest priority and Q0 the
lowest.
Weighted Fair Queuing is used to guarantee each queue's minimum bandwidth based on their
bandwidth portion (weight) (the number you configure in the Weight field). Queues with larger
weights get more guaranteed bandwidth than queues with smaller weights.
Weight When you select WFQ enter the queue weight here. Bandwidth is divided across the different traffic
queues according to their weights.
Chapter 23 Queuing Method
OLT2406 User's Guide
189