Table of Contents
Advertisement
Table 370 LLDP Commands (continued)
COMMAND
lldp transmit-interval <seconds>
lldp transmit-hold <value>
lldp transmit-delay <seconds>
lldp reinitialize-delay <seconds>
show lldp config
show lldp config interface port-
channel <aid>
show lldp info local
show lldp info local interface
port-channel <aid>
show lldp info remote
show lldp info remote interface
port-channel <aid>
show lldp info statistic
show lldp info statistic interface
port-channel <aid>
clear lldp remote-info
clear lldp remote-info interface
port-channel <aid>
clear lldp statistic
Chapter 101 LLDP
DESCRIPTION
Configures the transmit interval time for sending
LLDP frames.
seconds: 1-10 seconds
Configures the time-to-live (TTL) multiplier of the
LLDP frames. The device information on the
neighboring devices ages out and is discarded
when its corresponding TTL expires. The TTL value
is derived by multiplying the TTL multiplier by the
LLDP frames' transmit interval. Set the LLDP
packet transmitting interval shorter than its TTL to
update the OLT's device information in the
neighboring devices before it ages out.
value: 2-10, the interval multiplier to set the local
LLDP data TTL.
Configures the delay (in seconds) between the
successive LLDP frame transmissions initiated by
value or status changes in the local system.
seconds: 1-8192 seconds
Configures the number of seconds for LLDP to
wait to re-initialize a port that was disabled.
seconds: 1-10 seconds
Displays the global LLDP configuration.
Displays the LLDP configuration for the specified
ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
Displays the LLDP local information (globally).
Displays the LLDP local information for the
specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
Displays the LLDP remote information (globally).
Displays the LLDP remote information for the
specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
Displays the LLDP statistics (globally).
Displays the LLDP statistics for the specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
Deletes all LLDP remote information.
Deletes the LLDP remote information for the
specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
Resets the LLDP statistics to zero.
OLT2406 User's Guide
700
M
P
C
13
C
13
C
13
C
13
E
3
E
3
E
3
E
3
E
3
E
3
E
3
E
3
E
13
E
13
E
13
Advertisement
Table of Contents
Troubleshooting
