Configuring Mac Forced Forwarding - ZyXEL Communications OLT2406 User Manual

The following table shows some possible subnet masks using both notations.
Table 33 Alternative Subnet Mask Notation
SUBNET MASK
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252

12.2 Configuring MAC Forced Forwarding

Use this screen to manage MAC forced forwarding profiles. These profiles define a static forwarding
table that lets you forward matched traffic to specific access routers or servers.
Click Advanced Application > MAC Forced Forwarding to display the configuration screen as shown.
Figure 80 Advanced Application > MAC Forced Forwarding
The following table describes the labels in this screen.
Table 34 Advanced Application > MAC Forced Forwarding
LABEL
Active
Apply
Cancel
VID
Chapter 12 MAC Forced Forwarding
ALTERNATIVE
NOTATION
/24
/25
/26
/27
/28
/29
/30
DESCRIPTION
Select the check box to enable MACFF (MAC Forced Forwarding) on the OLT.
Click Apply to save your changes to the OLT's run-time memory. The OLT loses these changes if it
is turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Enter the VLAN ID of the hosts.
OLT2406 User's Guide
LAST OCTET LAST OCTET
(BINARY) (DECIMAL)
0000 0000 0
1000 0000 128
1100 0000 192
1110 0000 224
1111 0000 240
1111 1000 248
1111 1100 252
127