79.1 Overview
This chapter shows you how to configure profiles of ONT alarm thresholds. You can also view the SFP
transceiver information and operating parameters.
79.2 PON DDMI Commands
The following section lists the commands for this feature.
Table 300 PON DDMI Commands
COMMAND
interface transceiver-ddmi <aid>
tlimit [alarm <high> <low>]
[warn <high> <low>]
vlimit [alarm <high> <low>]
[warn <high> <low>]
blimit [alarm <high> <low>]
[warn <high> <low>]
txlimit [alarm <high> <low>]
[warn <high> <low>]
rxlimit [alarm <high> <low>]
[warn <high> <low>]
no inactive
inactive
Chapter 79 PON DDMI
C
DESCRIPTION
Enters sub-command mode for configuring the
interface transceiver threshold settings.
aid: <ge|msc|pon>-<slot>-<port>
Sets the temperature alarm and/or warning
threshold.
value range <-128 ~ 128> Units: degrees Celsius
C
Sets the voltage alarm and/or warning
threshold.
value range <0 ~ 6.55> Units: volts
Sets the bias current alarm and/or warning
threshold.
value range <0 ~ 131> Units: mA
Sets the transmission power alarm and/or
warning threshold.
value range <-40 ~ 8.2> Units: dbm
Sets the receive power alarm and/or warning
threshold.
value range <-40 ~ 8.2> Units: dbm
Activates the interface transceiver threshold
configuration.
Disables the interface transceiver threshold
configuration.
OLT2406 User's Guide
582
H A P T E R
PON DDMI
79
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13