ZyXEL Communications OLT2406 User Manual page 196

Figure 119 Advanced Application > VLAN Stacking > Port-based QinQ
The following table describes the labels in this screen.
Table 68 Advanced Application > VLAN Stacking > Port-based QinQ
LABEL DESCRIPTION
Port This field displays the port number. * means all ports (on the same OLT).
SPVID SPVID is the service provider's VLAN ID (the outer VLAN tag). Enter the service provider ID (from 1 to
4094) for frames received on this port. See
on VLAN ID.
Priority Select a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames
received on this port.
"0" is the lowest priority level and "7" is the highest.
Apply Click Apply to save your changes to the OLT's run-time memory. The OLT loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes to
the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 24 VLAN Stacking
Chapter 9 on page 107
OLT2406 User's Guide
196
for more background information