ZyXEL Communications OLT2406 User Manual page 89

OLT2406# config
OLT2406 (config)# interface olt pon-3-1
OLT2406 (config-olt)# register-method A
OLT2406 (config-olt)# no inactive
OLT2406 (config-olt)# exit
OLT2406 (config)# remote ont ont-3-1-1
OLT2406 (config-ont)# sn 414C434C00000082
OLT2406 (config-ont)# password 44454641554C544D4455
OLT2406 (config-ont)# plan-version testVersion
OLT2406 (config-ont)# no inactive
OLT2406 (config-ont)# exit
Use the remote ont <aid> check-version command to upgrade the ONT to the latest firmware via
9
the OLT.
We can also use the remote ont <aid> check-version command to upgrade all the ONTs
connected to the same PON port to the latest firmware after the planned version of all ONTs is
configured.
See Table 353 on page 669
OLT2406# remote ont ont-3-1-1 check-version
ONU[3-1-1] Start do software download to image(1):testVersion!
10 Use the mgmt-ont-img command to enter the sub-command mode. Enter the disp queue command
to check the waiting queue's status for firmware upgrades.
OLT2406# mgmt-ont-img
OLT2406(mgmt-ont-img)# disp queue
+--------------------------+
| |software download table|
+--------------------------+
|1||ont-3-1-1| downloading |
+--------------------------+
There are Total 1 ont in queue, show queue size is 128.
11 Enter the disp upgrade-status <aid> command to check the firmware upgrade result.
See Table 353 on page 669
OLT2406# mgmt-ont-img
OLT2406(mgmt-ont-img)# disp upgrade-status ont-3-1-1
+--------------------------+
| Upgrade Status table|
+--------------------------+
|1||ont-3-1-1|
+--------------------------+
11a If you skip step 7, you can also use the remote ont <aid> command to enter the sub-command
mode. Next, enter the onu-reboot <cr>|<1>|<2> command to reboot the ONT, and select the
firmware that was updated when the ONT was downloading firmware via the OLT.
Note that the standby firmware of the ONT will be updated when the ONT is downloading firmware
via the OLT.
Chapter 6 Tutorials
for more information about this command.
for more information about this command.
Successful |
OLT2406 User's Guide
89