The following table shows the IGMP commands for an interface port channel.
Table 276 IGMP Commands on Interface Port Channel
COMMAND
remote uniport <aid>
igmpchannel <uni-vid> <cr>
Chapter 76 Multicast
DESCRIPTION
Configures UNI port settings.
aid: uniport-<pon>-<ont>-<card>-<port>
Creates an IGMP channel on this port.
uni-vid: The default VLAN ID for IGMP reports,
that is Join and Leave packets. You must first
create the VLAN using the vlan command
under the remote uniport command.
(Required.)
OLT2406 User's Guide
539
M
P
C
13
C
13