ZyXEL Communications OLT2406 User Manual page 613

2u temperature-hardened, 6-slot mini chassis gpon olt
Table of Contents

Advertisement

Table 319 SNMP Interface Traps (continued)
OPTION
OBJECT LABEL
linkdown
linkDown
LinkDownEventOn
autonegotiation
AutonegotiationFailedEventOn
AutonegotiationFailedEventClear
lldp
lldpRemTablesChange
transceiver-ddm
DDMIRxPowerEventOn
DDMITemperatureEventOn
DDMITxBiasEventOn
DDMITxPowerEventOn
DDMIVoltageEventOn
DDMIRxPowerEventClear
DDMITemperatureEventClear
DDMITxBiasEventClear
DDMITxPowerEventClear
DDMIVoltageEventClear
Table 320 SNMP IP Traps
OPTION
OBJECT LABEL
ping
pingProbeFailed
pingTestFailed
pingTestCompleted
traceroute
traceRouteTestFailed
traceRouteTestCompleted
Chapter 85 Access Control
OBJECT ID
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.890.1.5.17.4.31.2.1
1.3.6.1.4.1.890.1.5.17.4.31.2.1
1.3.6.1.4.1.890.1.5.17.4.31.2.2
1.0.8802.1.1.2.0.0.1
1.3.6.1.4.1.890.1.5.17.4.31.2.1
1.3.6.1.4.1.890.1.5.17.4.31.2.2
OBJECT ID
1.3.6.1.2.1.80.0.1
1.3.6.1.2.1.80.0.2
1.3.6.1.2.1.80.0.3
1.3.6.1.2.1.81.0.2
1.3.6.1.2.1.81.0.3
OLT2406 User's Guide
613
DESCRIPTION
This trap is sent when the Ethernet
link is down.
This trap is sent when the Ethernet
link is down.
This trap is sent when an Ethernet
interface fails to auto-negotiate
with the peer Ethernet interface.
This trap is sent when an Ethernet
interface auto-negotiates with the
peer Ethernet interface.
The trap is sent when entries in the
remote database have any
updates.
Link Layer Discovery Protocol
(LLDP), defined as IEEE 802.1ab,
enables LAN devices that support
LLDP to exchange their configured
settings. This helps eliminate
configuration mismatch issues.
This trap is sent when one of the
device operating parameters (such
as transceiver temperature, laser
bias current, transmitted optical
power, received optical power and
transceiver supply voltage) is above
or below a factory set normal
range.
This trap is sent when all device
operating parameters return to the
normal operating range.
DESCRIPTION
This trap is sent when a single ping probe fails.
This trap is sent when a ping test (consisting of a series
of ping probes) fails.
This trap is sent when a ping test is completed.
This trap is sent when a traceroute test fails.
This trap is sent when a traceroute test is completed.

Advertisement

Table of Contents
loading

Table of Contents