85.3.1 SNMP Command Examples
This example shows you how to display the SNMP information on the OLT.
OLT2406# show snmp-server
[General Setting]
SNMP Version
Get
Community
Set
Community
Trap Community
[ Trap Destination ]
Index
-----
1
2
3
4
This example shows you how to display all SNMP user information on the OLT.
OLT2406# show snmp-server user
[ User Information ]
Index
Name
-----
------
1
admin
85.4 Setting Up Login Accounts
Up to five people (one administrator and four non-administrators) may access the OLT via telnet at any
one time.
• An administrator is someone who can both view and configure OLT changes. The username for the
Administrator is always admin. The default administrator password is 1234.
Note: It is highly recommended that you change the default administrator password (1234).
• A non-administrator (username is something other than admin) is someone who can view but not
configure OLT settings.
Chapter 85 Access Control
: v2c
: public
: public
: public
Version
IP
-------
------------
v2c
0.0.0.0
v2c
0.0.0.0
v2c
0.0.0.0
v2c
0.0.0.0
SecurityLevel
-------------
noauth
OLT2406 User's Guide
Port
Username
----
--------
162
162
162
162
GroupName
--------------
admin
618