Simulation - ZyXEL Communications OLT2406 User Manual

Table 107 Advanced Application > PPPoE > Intermediate Agent > Option 82
LABEL
Option 82
Remote Id
Delete
Delete
Cancel

29.3.6 Simulation

Use this screen to start or stop a PPPoE client test to simulate the ONT creating a PPPoE session and
getting an IP address from the PPPoE server. Up to 1 session can be simulated at a time.
Click the Simulation link in the Intermediate Agent screen to display the screen as shown.
Figure 160 Advanced Application > PPPoE > Intermediate Agent > Simulation
The following table describes the labels in this screen.
Table 108 Advanced Application > PPPoE > Intermediate Agent > Simulation
LABEL
Mode(*)
AID(*)
username(*)
password(*)
vlan(*)
Chapter 29 PPPoE
DESCRIPTION
This field displays the option 82 Remote ID information that is added in the PPPoE discovery
packets for this VLAN.
Select an entry's check box to select a specific entry.
Select the entries you want to remove and click Delete to remove them.
Click Cancel to clear the check boxes.
DESCRIPTION
Select Start to start a PPPoE client test to simulate the ONT creating a PPPoE session and getting
an IP address from the PPPoE server. Otherwise, select Stop to stop the PPPoE client test.
Select an ONT that you want to test.
Enter the user name of the PPPoE account.
Enter the password of the PPPoE account.
Enter the Service Node Interface (SNI) SVID on subscriber port (ONT) in the range of 1 to 4094.
This is the outer VLAN on the service node interface.
OLT2406 User's Guide
264