Table of Contents
Advertisement
Table 113 Advanced Application > ONT VoIP > VoIP Common Profile (continued)
LABEL
oob dtmf
signal code
Apply
Cancel
Clear
Index
Name
Rule
Delete
Select
*
Delete
Cancel
31.2 ONT VoIP SIP Profile
Use this screen to configure profiles of ONT VoIP SIP settings. Click Voip-Sip-Profile in the Advanced
Application > ONT VoIP screen to display the screen as shown.
Chapter 31 ONT VoIP
DESCRIPTION
Turn out-of-band DTMF carriage on or off.
Set the signaling code:
loo-str: Loop start
gro-str: Ground start
loo-rev: Loop reverse battery
coi-fir: Coin first
dia-ton: Dial tone first
mul-par: Multi-party
Click Apply to save the changes.
Click Cancel to clear the fields.
Click Clear to return the screen's settings to the defaults.
This is the index number of an ONT common VoIP profile.
This is the name of the profile.
This displays the profile's settings.
Select this for one or more profiles and click Delete to remove them.
Select this to edit the profile in the fields above.
Use this row to select all of the profiles for deletion.
Click Delete to remove the profiles with the Delete option selected.
Click Cancel to begin configuring the screen again.
OLT2406 User's Guide
275
Advertisement
Table of Contents
Troubleshooting
